Differences

This shows you the differences between two versions of the page.

--- pub:projects:3d_printers_and_3d_printing:flashforge_creator_3_pro [2026/04/03 00:36] – admin
+++ pub:projects:3d_printers_and_3d_printing:flashforge_creator_3_pro [2026/04/03 00:40] (current) – admin
@@ Line 3: / Line 3: @@
 ===== Flashforge Creator 3 Pro - fan fix =====
-Did you ever try to turn on the left or right cooling fan at the Flashprint((The Slicer provided by Flashforge, currently at Version 5.8.7, [[https://www.flashforge.com/pages/software-flashprint]])) control panel and observed that only the right cooling fan actually spins?
+Did you ever try to turn on the left or right cooling fan at the Flashprint((The Slicer provided by Flashforge, currently at Version 5.8.7, [[https://www.flashforge.com/pages/software-flashprint]])) control panel and observed that only the right cooling fan actually spins? I stumbled upon this, contacted Flashforge customer support, but after many fruitless discussions, it was also clear that Flashforge wasn't interested to fix anything at all.
-I stumbled upon this, contacted Flashforge customer support about this, but after many fruitless discussions with them, it was also clear that Flashforge wasn't interested to fix anything at all.
+When testing with a gcode file((The printer uses a .gx format, which is similar to gcode but with an additional header at the top. Further info can be found here: [[https://github.com/slic3r/Slic3r/issues/4869]] and [[https://bkienzle.com/posts/converting-flashforge-file-format/]].)).
-When testing with a gcode file((The printer uses a .gx format, which is similar to gcode but with an additional header at the top. Further info can be found here: [[https://bkienzle.com/posts/converting-flashforge-file-format/]].)).
 This long article is about getting the left cooling fan to work, starting reverse engineering with Ghidra and patching the firmware and much more.

wiki.auditeon.com

User Tools

Site Tools

Differences

Page Tools